SPX M14 Diamond Core Drill 8mm

SPX 8mm M14 Diamond Core Drill – Internal Wax Cooling

The SPX 8mm M14 Diamond Core Drill is built for fast, accurate drilling through porcelain, ceramic, granite, marble and engineered stone. Featuring premium industrial diamonds and an internal self-cooling wax core, it delivers outstanding cutting performance while helping reduce heat build-up during dry drilling.

The M14 threaded fitting screws directly onto most angle grinders, providing a secure connection and maximum power transfer for demanding trade applications. The internal wax is released as the bit heats up, helping extend tool life, use water to prevent dust

Features

• 8mm cutting diameter

• M14 threaded fitting for angle grinders

• Premium industrial diamond cutting edge

• Internal self-cooling wax for longer life

• Dry drilling on most applications

• Fast, clean cuts with minimal chipping

• Heavy-duty construction for professional use

Ideal For

• Porcelain tiles

• Ceramic tiles

• Granite

• Marble

• Engineered stone

• Natural stone

Suitable Applications

Perfect for installing:

• Tapware

• Shower fittings

• Waste outlets

• Pipe penetrations

• Electrical conduit

• General plumbing and construction work

Professional Tip

Start drilling at a slight angle before bringing the drill upright. Use moderate pressure and allow the diamonds to do the cutting. Occasionally lift the bit to clear dust and assist cooling, use water helping maximise cutting speed and tool life.

Engineered for professional tradespeople, the SPX 8mm M14 Diamond Core Drill delivers fast, precise holes and dependable performance on even the toughest materials.

WARNING – SILICA DUST HAZARD
Never dry drill materials containing crystalline silica. Use continuous water suppression and appropriate dust-control measures throughout the drilling process. Always wear suitable PPE, including a correctly fitted respirator, eye protection, hearing protection, gloves and protective clothing. Only use water with tools designed and rated for wet operation. Follow all relevant safety regulations and the material manufacturer’s SDS.

Water suppression is an important control, but PPE should not be relied upon by itself. WorkSafe Victoria guidance also says electrical tools must be suitable for use with water.